How to Set Up Your Floor Scrubber: Complete Installation Guide
Step-by-step installation guide for Aikerui floor scrubbers. Learn how to unpack, assemble the squeegee, install brushes, connect the battery, and prepare your machine for first use.
In This Guide
Unpacking and Initial Inspection
When your Aikerui floor scrubber arrives, carefully inspect the packaging.
- Inspect packaging for shipping damage before opening
- Verify all components against the packing list
- Check the machine model and serial number match your order
Assembling the Squeegee
The squeegee is critical for water recovery. Attach it to the mounting bracket at the rear of the machine.
- Mount squeegee frame to the rear bracket
- Insert front blade (harder) and rear blade (softer)
- Adjust tilt angle to 45-degree for optimal contact
Installing Brushes
Install disc brushes or pad drivers depending on your floor type.
- Turn off machine and raise brush deck
- Align brush with drive hub and twist until locked
- Lower deck and test at low speed
Pre-Operation Checklist
Before your first cleaning run, complete this checklist.
- Fill solution tank with water
- Test all controls: drive, brush, squeegee
- Watch the installation video on YouTube for visual guidance
Ready to Get Factory-Direct Pricing?
Get a quote within 24 hours. No middlemen — buy direct from the manufacturer and save 30-50%.
About the Author
Zhang Hengming is a cleaning equipment engineer at Aikerui with 8+ years of experience in industrial floor cleaning solutions. He has helped 200+ facilities across 50+ countries select the right cleaning equipment.