Loading...
+86 199 6523 6428info@aikeruiclean.com
Menu
Loading...
5models available — factory direct, OEM & wholesale, CE certified.
A ride on floor scrubber is bought for throughput, not for the specification sheet. Once cleanable area passes roughly 2,000-3,000 sqm, the labour cost of walking a machine behind you overtakes the price difference, and a seated ride on floor scrubber typically covers 3,000 to 6,000 sqm per hour against a fraction of that for a walk-behind.
That changes what matters in the specification of any ride on floor scrubber machine: larger solution and recovery tanks to avoid dump-and-refill stops, wider decks to reduce pass count, and a serviceability layout that lets one operator keep the machine running across a shift.
If you are comparing specifications online you will see both spellings — ride on floor scrubber and ride-on floor scrubber describe the same machine. A ride-on floor scrubber is simply the hyphenated form used by most European catalogues; the specification to compare is identical either way.
An industrial ride on floor scrubber also has to survive the floor it works on. Expansion joints, uneven patches and abrasive dust load the squeegee and brush far harder than a smooth retail slab does, which is why we ask about surface condition before recommending a deck width or brush compound.
We build ride-on scrubbers for warehouses, distribution centres, airports, supermarkets and factory floors. OEM branding, private label and fleet configurations are available on volume orders, with spare brushes, squeegees and pad drivers supplied from the same production line.
Ride on floor scrubber range — pick by deck width and area
| Model type | Deck width | Tank (solution / recovery) | Output | Best for |
|---|---|---|---|---|
| Compact ride on floor scrubber | 28 inch | around 60 / 70 L | about 3,000 sqm/h | supermarkets, mid-size retail, 2-3 m aisles |
| Standard industrial ride on floor scrubber | 32-36 inch | around 90 / 100 L | about 4,000-5,000 sqm/h | warehouses, distribution centres, factory floors |
| Wide-deck ride on floor scrubber machine | 40 inch | around 120 / 130 L | about 6,000 sqm/h | airports, logistics hubs, large open production halls |
Other machine categories
Anhui Aikerui Environmental Protection Technology Co., Ltd. has manufactured floor scrubbers and cleaning equipment since 2008, from our own 10,000+ sqm factory in Anqing, Anhui, China. We hold CE and ISO 9001 certification and export to more than 50 countries.
Because we build both the machines and the brushes, squeegees and pad drivers that go on them, you buy replacement consumables direct from the same production line — usually 30-50% below dealer pricing, with no middle-man markup.
Typically 3,000-6,000 sqm per hour depending on deck width, travel speed and the number of dump-and-refill stops. On large open floors the practical limit is usually tank capacity rather than the machine's speed, which is why a larger tank often matters more than a wider deck.
The economics usually flip somewhere between 2,000 and 3,000 sqm of regularly cleaned area. Below that a walk-behind is generally the better buy; above it, the operator hours saved by not walking behind the machine exceed the price difference fairly quickly.
Our range runs from compact 28 inch machines up to 40 inch decks for wide-aisle warehouses. Deck width is the biggest single lever on productivity, so we size it against your aisle width and racking layout rather than against floor area alone.
Yes, with the right brush and squeegee setup. Industrial concrete with expansion joints and uneven patches needs a more compliant squeegee and often a heavier brush pressure, which is why we ask about surface condition before recommending a model.
Nothing structural — both describe a machine you sit on that applies solution, scrubs and vacuums the water back in the same pass. Scrubber dryer is the term more common in Europe; ride on floor scrubber machine is more common in North America. The specification you should compare is the same either way: deck width, tank capacity, brush pressure and runtime.
Gradients are a traction and braking question, not a power question. Send us the gradient percentage and the surface type and we will confirm whether a standard unit is suitable or whether you need a drive configuration with additional braking.
Tell us your floor area, surface type and daily cleaning hours — we will recommend the right model and quote factory-direct. OEM branding and spare parts available.
Request a Quote
